![]() If the shift lever now moves freely in and out of the park position, the BTSI solenoid is faulty and the interlock cable must be replaced. If the shift lever still does not move from the PARK position, remove the BTSI solenoid from the shift lever assembly.If the lever now moves freely in and out of PARK, perform the Circuit Test below.It’s easy to tell if the battery terminals aren’t tight. If a terminal is loose, the electrical connection to the van is bad, and the dash lights can flicker without it starting. Replace your faded or dysfunctional factory headlamps with these high. Bulb: H13 (9008) high/low beam (not included). With the brakes applied, try moving the shifter out of the PARK position. A loose battery terminal can cause your Ford Freestar to have flickering dash lights and a no start condition. Ford Freestar 2004, Black Factory Style Headlights by Lumen, 1 Pair.Insert the ignition key and turn it to the ON position.Disconnect the wire connector from the rear of the BTSI solenoid.The solenoid is part of the interlock cable assembly. the abs and brake light will come on when vehicle is low on voltage so it can keep the vehicle running as long as possible, the charging system is processor controlled, meaning the vehicles PCM tell the alternator how much voltage it needs to supply, with the battery going dead the alternator output is low, either the alternator is bad or the PCM is malfunctioning, if its the PCM it is covered. Remove the instrument panel cover below the steering column, then remove the steering column shrouds to gain access to the brake transmission shift interlock (BTSI) solenoid.SOURCE: gear shifter does NOT shwitch from park and break ![]()
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |